System impaired? Call 1-855-876-3473 — crew availability confirmed before every booking.
FireWatch Compliance watcher patrolling a commercial warehouse past a red fire sprinkler riser
Pacific Northwest · Licensed fire protection contractor

Staffed Fire Watch for Commercial Properties

NFPA-compliant fire watch coverage for impaired alarm or sprinkler systems, hot work permits, and construction. Licensed fire protection contractor — not a security firm. Trained watchers, digital GPS-stamped rounds, AHJ-ready reports.

WA · OR · ID · CA · MT · CO · AZ · NM C-16 · C-10 California NFPA 25 · 72 · 101 · 241 $5M General Liability
Crew availability confirmed before every booking · Call to check current windows

If your system just went down

Fire-system outage checklist

Impaired fire alarm or sprinkler system? Follow these steps in order. We can run step 4 with you — call 1-855-876-3473 and we'll coach you through the first three while we check crew availability.

  1. Notify your fire alarm monitoring company that the system is offline so false-alarm dispatches stop. Keep their reference number.
  2. Notify your insurance carrier per your policy's impairment-notification clause. Many carriers require written notice within 24 hours or coverage is affected.
  3. Notify the local fire marshal / AHJ that the system is impaired. Ask what fire-watch cadence they expect — typically every 15, 30, or 60 minutes — and confirm whether they'll require a written log at restoration.
  4. Call FireWatch Compliance at 1-855-876-3473 with your site address, affected system, and requested start time. We confirm crew availability, dispatch window, and send the coverage confirmation. We can also submit the AHJ's log format on your behalf.
  5. Document the impairment start time and cause in your own records. We'll time-stamp every patrol round once we're on site so your AHJ, insurer, and attorney see one clean timeline.
  6. Start repair coordination immediately. Fire watch cost accrues hourly — the fastest path off the clock is restoring and testing the impaired system. Fire Solutions NW can also inspect, test, and restore most alarm and sprinkler systems in the PNW.

How to request coverage

Three steps to a confirmed fire watch.

We confirm crew availability before we commit to a window — no overbooking, no "we'll figure it out," no missed starts.

01 Submit the request

Call 1-855-876-3473 or submit the form below. We need four things to check availability: site address, callback number, affected system, requested start time.

02 We confirm crew + window

We check watcher availability across the PNW and call you back with a confirmed start time and estimated hours. No speculation — if we can't cover the window, we say so immediately so you can find secondary coverage.

03 Watcher on site + AHJ-ready report

Trained watcher arrives at the confirmed time, patrols on the AHJ's cadence, logs each round digitally with GPS and photo. At watch end you get a PDF report formatted for the fire marshal.

Fast path

Request Fire Watch Coverage

The four fields below are what we need to check availability. We call you back to confirm the window.

We call you back to confirm crew + window · Or call 1-855-876-3473

Request received. We'll call your callback number to confirm crew availability and the start window. Need immediate coverage? Call 1-855-876-3473 now.
Form submission failed. Please call 1-855-876-3473 directly so we don't miss your request.

Code reference

When fire watch is legally required

Not optional. The second your fire protection system goes offline, liability shifts to the building owner. Here's where code puts you on the hook.

Sprinkler out

NFPA 25 § 15.5

Impaired sprinkler systems require a fire watch when the impairment exceeds the limits in your adopted edition — typically 10 hours in a 24-hour period. The AHJ has final authority.

Alarm out

NFPA 72 § 10.21.5

Fire alarm or detection system out of service for more than 4 hours in a 24-hour period triggers a fire-watch requirement in most jurisdictions.

Hot work

IFC § 3504

Welding, cutting, grinding, or torch-applied roofing requires a hot-work permit and a dedicated fire watch during the work and for 30+ minutes after it ends.

Impairment

IFC § 901.7

When required fire protection systems are impaired by any cause — maintenance, upgrade, renovation — the fire code official can require a fire watch until restored.

Construction

NFPA 241

Construction, alteration, and demolition projects frequently require a fire watch per the site-specific fire protection plan filed with the fire marshal.

Life-safety

NFPA 101 § 4.6.11

Where exit systems, egress lighting, or notification appliances are out of service, equivalent protection is required — typically a documented fire watch.

Official guidance by jurisdiction

Verify with your local fire marshal.

Code adoption and local amendments vary. Confirm your exact requirement with your local AHJ — these are their official pages.

What sets us apart

A licensed fire protection contractor — not a security firm.

Most "fire watch" vendors are generic security companies with no fire training and paper logbooks that fire marshals are increasingly rejecting. Here's what's different when a licensed fire protection contractor runs your watch.

Trained to NFPA — not just told to walk

Every FireWatch Compliance watcher is trained to NFPA 101 fire-watch procedures, use of portable extinguishers, evacuation signaling, and what to do when a system is partially impaired vs. fully down.

Digital rounds with GPS + photo stamps

Every patrol logged with GPS location, timestamp, and photo. No "I was there" paper logs. The fire marshal gets a PDF they can actually trust — and so do your insurer and your attorney.

AHJ-ready PDF at watch end

Automatic PDF report at the end of every engagement: patrol frequency, every round time-stamped, any findings, systems monitored. Hand it directly to the fire marshal.

One company for inspection, service, and watch

Fire Solutions NW inspects, tests, services, and repairs fire protection systems across the PNW. FireWatch Compliance covers you while those systems are offline. One invoice, no finger-pointing.

Pricing

Published rates. No surprise invoices.

Transparent pricing so you can budget before you call. Contract rates for extended coverage and multi-site portfolios. Call to confirm current crew availability.

Standard
$95/hr per watcher
  • Business hours and nights
  • 4-hour minimum
  • Trained watcher + digital rounds
  • AHJ-ready PDF at watch end
  • No surcharge for weekends or overnight
Rapid dispatch
+$30/hr surcharge
  • Prioritized crew availability check
  • Holidays and overnight call-outs
  • Remote and rural PNW locations
  • On top of standard $95
  • Waived for contract customers

Primary coverage areas

Seattle · Tacoma · Portland

Pacific Northwest is our home market. Deepest crew bench, strongest AHJ relationships. See each city for local code details and neighborhood coverage.

Also serving Spokane, Tri-Cities, Yakima, Wenatchee, Olympia, Bremerton, Bellingham, Salem, Eugene, Boise, Coeur d'Alene. Licensed in WA · OR · ID · CA · MT · CO · AZ · NM.

FAQ

Answers before you call.

When exactly is fire watch required?

The moment your fire alarm, sprinkler, or suppression system is impaired beyond the threshold in your adopted code edition, or the moment a fire marshal red-tags your building. Fire watch continues until the system is restored and tested, or the AHJ releases the requirement in writing. Unsure? Call us — we'll tell you straight, no sales pressure.

How do I request coverage?

Call 1-855-876-3473 or submit the coverage request form on this page with your site address, callback number, affected system, and requested start time. We confirm crew availability before we commit a window.

How fast can you actually dispatch?

Depends on current crew availability. Call to check the window for your location and start time. We never commit a window we can't staff — if we can't cover you, we say so immediately.

What does the watcher actually do?

Documented patrols on a cadence set by the AHJ — typically every 15, 30, or 60 minutes. Each round covers every floor, stairwell, exit, and the impaired system area. Watch for fire, smoke, odor, water leaks, heat, and blocked egress. Every round logged in-app with GPS + photo. If anything is wrong: 911, notify you, begin evacuation if needed.

What do I hand to the fire marshal?

A PDF report generated at watch end. Every round time-stamped, GPS-stamped, and photo-verified. Cover page with building address, AHJ name, triggering impairment, start and end of the watch, and a summary of findings. 7-year digital retention on our side.

How do you bill?

Per hour per watcher in 4-hour minimum blocks. Billed weekly for engagements under 30 days; bi-weekly for contract engagements. Credit card, ACH, check. Emergency dispatch: deposit up front. Contract customers: net-30.

Who are you?

FireWatch Compliance is operated by Fire Solutions NW, a commercial fire protection contractor based in Allyn, Washington. 28+ years in fire protection. Licensed in Washington, Oregon, Idaho, California (C-16 Fire Protection + C-10 Electrical), Montana, Colorado, Arizona, and New Mexico.

Your system is down.
We're your one call.

Staffed fire watch across the PNW. Code-accurate rounds. AHJ-ready paperwork. Call to check current crew availability.

1-855-876-3473
📞 Call for Availability
📞 Call 1-855-876-3473 for Availability